Best Hacksaw on the market in 2021 (Perfect for your Garage or Work-shop)

[table id=17 /]

Finding the best hacksaw can be a daunting task. With the number of options available on the market, and the sheer amount of marketing BS out there it’s hard to know which one is going to give you good value for money. That’s where we come in with this guide to finding the best hacksaw. We are going to break down all of the key points that you should keep in mind when you’re shopping for a hacksaw. We will also go through some of the top models that are available right now. Whether you’re just a casual DIY enthusiast or a seasoned professional who needs the best hacksaw, we have the tool for you.

There are a few main differences between common hacksaw models, most notably the size. Other than the size differing in these models you will find they are basically the same tool. Regardless of which style of hacksaw you prefer for your specific task we’re sure that you will find one on this list to suit you. So what makes a good hacksaw? For a start it should obviously be durable, and last a long time without having any major issues. So it needs to be constructed from high quality material. But the material being durable and high quality is not enough, it must also be lightweight as if you’re holding the hacksaw for long periods of time it can become quite tiring if the weight is too much.

Hacksaws are perfect for making cuts in metal and various alloys, and that is there primary use case (unlike the regular hand saw), but they can also be used to make clean cuts in a variety of different materials. With out any more time wasted let’s get onto the top choices, and figure out which one is right for you.

 

This site uses ads and affiliate content, earning commission on qualifying sales. Disclosure.

 

Best Hacksaw – Our Top Picks

Below we have listed our best hacksaw models for cutting steel, and for general use. These reviews on this list are aimed at simplifying the process of finding and procuring the best hacksaw, by clearing up the key factors you need to consider before you buy a new handsaw. We also go over various pros and cons of each model to help you spend your money wisely.

 

#1 Best Hacksaw (Versatility): DEWALT 5 in 1 Hacksaw

the DEWALT DWHT20547L is in the number one place on this list for a good reason. Unlike some others hacksaws, this option is very modern and takes a new approach allowing for 5 different setups for different sawing situations. It is very versatile because it can be used in a number of different ways and blade configurations.

It is extremely well built (as is common for DEWALT tools) and the blade is high tension and securely holds up to 330 pounds. As is the case with any tool that you will be holding onto a lot, it needs to be ergonomic. In this regard the DEWALT 5 in 1 does not disappoint, it’s highly ergonomic and comfortable to grip onto for long periods of use. The highly durable materials that this saw is constructed from mean it will stand up to tough and wet outdoor conditions. Like any good hacksaw, the saws blade is easily removable and replaceable, so when it inevitably wears out it’s as simple as just swapping in a new blade.

 

 

#2 Best Hacksaw (All round Quality & Value): Klein Tools 702-12 Hacksaw

This hacksaw from Klein is another great example of a top notch hacksaw that will suit just about anyone who is looking for a quality hacksaw at a reasonable price. This is a high tension hacksaw which means that it is capable of holding the blade at tensions of up to 30,000 PSI for the most precise and accurate cuts possible. The 702-12 Klein hacksaw comes with two different blades. One of the blades is 12 inches is length and has 24 teeth per inch (TPI), the other is a 6 inch blade, also 24 TPI.

A cool feature that this hacksaw has is that you can store spare blades within the handle compartment, however some consumers have noted that the blades are prone to spilling out of the compartment. Overall this hacksaw from Klein is a good choice if you’re on a tight budget and want something that still gets the job done well.

 

 

#3 Best Budget Hacksaw: Stanley STHT20138 High Tension Hack Saw

This hacksaw from Stanley has a 12 inch fixed blade length, with 4.3 inch cutting depth. This hacksaw is very affordable, but you should remember that it doesn’t mean that it’s not a quality tool. This is a perfectly fine hacksaw for those on a tight budget. The frame of this hacksaw is constructed completely out of metal, so it is tough and durable – it should last you a long time and a lot of use.

This saw has the ability to adjust the blade 80 degrees and 180 degrees enabling perfectly flush cuts to be made. This hacksaw from Stanley features a large and ergonomic handle with a tension knob situated below it. As far as the tension of this hacksaw goes it can take up to 225 pounds of blade tension. Overall if you’re on a tight budget, this is not a bad choice, however there are certainly more ergonomic choices out there if you’re willing to pay a little more.

 

 

#4 Best Hacksaw (Lightweight): Lenox Tools Hacksaw

This Lenox tools hacksaw is yet another good option at a relatively cheap price. It has an I-beam construction which is designed to allow blade tension of up to 50l PSI – with tension this high you can be sure that the blade is rigid enough to perform cuts in metal with a high degree of precision. As far as the construction goes, it’s built well, it is also built from materials that will endure the outdoor environment.

Another bonus is that the handles of this hacksaw are rubberized to enhance grip in slippery and wet conditions. Similar to the DEWALT hacksaw, this model features the ability to store blade within the beam of the saw itself. It is quite handy to have the extra compartment for storage. As far as the blade is concerned, it comes with 24 TPI (Teeth Per Inches) and is 12 inches long. The blade can easily be replaced so when you decide it’s time for a new one, it’s no hassle to undo.

 

 

#5 Durable Option: Park Tool Hacksaw

This Park tool hacksaw is a traditional looking tool, which fills the  role of sawing metal in the shop perfectly. The frame of this hacksaw is constructed from die cast aluminum, so it is very durable, yet quite light weight. It comes with a 12 Inch, 32 TPI blade. This hacksaw has a tension adjuster conveniently located at the base of the handle, so you can easily adjust the tension for whichever type of metal you’re sawing.

As we mentioned before ergonomics is a primary concern when it comes to purchasing any type of saw, and in this department the park tool hacksaw does not disappoint. It has a very ergonomic design and a rubber handle that makes it easy to grip onto. Overall this hacksaw is a good all around choice and won’t break the bank.

 

 

Frequently Asked Questions About Hacksaws

Once you’ve read through our guide above you should know most of what you need to about choosing the best hacksaw. However, you may still be left with some questions. The aim of this section that follows is to address these remaining unanswered questions so that you can put your mind at ease.

Q: After purchasing a good hacksaw, how can I look after it and prolong its life?
Properly using a hacksaw is a good way of lengthening its life span. However, there are other additional measures that you can take to ensure that your hacksaw has a long and prosperous lifetime. First of all, you should always choose the right blade for the job. Blades with rougher teeth are ideal for getting it done quickly with some material, but with other materials you will want blades with finer teeth. Also an important thing to consider is that you should always make sure your work-piece is secure before starting to cut it.

Q: What safety measures should I take?
Like with any tool which has a sharp edge on it, you need to exercise some caution when using it. The hacksaw is no exception to this rule. Like I mentioned above you should always make sure that your work-piece is firmly secured before you start sawing. This will prevent any chance of you slipping and cutting yourself. You should also wear safety glasses and work gloves while using a hacksaw to protect your hands and eyes.
 

 

Factors to consider before you buy a Hacksaw

hacksaw in use

You should know by now, after reading this far into the article that choosing the best hacksaw is not as easy as it might seem. You have a plethora of options available on the market today. Some of them are very high quality tools, like the ones we’ve listed above. But some are lower quality which means they’re not worth buying. To help you pick the right tool for the job consider the factors that we mention below.

Frame Style

It is a mistake to forget about the frame of the hacksaw, as there are numerous options here. First there is the fixed type. The fixed type of hack saw frame doesn’t adjust (as the name suggests), it only comes in the one size, so better make sure you fit the tool before buying it. The adjustable frames on the other hand can extend in length meaning you can use a ton of different blade lengths. The frame of the hacksaw should be made from a high quality yet light material like steel or aluminum.

 

Weight

Weight is an important and often overlooked factor that you need to think about when you’re shopping for hacksaws. If you buy a hacksaw that’s too light it might not be durable enough to last for long. On the other hand you shouldn’t get one that’s too heavy because it will be harder to hold onto after long amounts of time.

 

Blade

The best hacksaw will be able to use a variety of different blades, so keep that in mind. A different blade is suited to different materials, meaning if the frame of your hacksaw is adjustable you can cut all sorts of different stuff. You should also think about which type of blade the saw comes with out of the box. Consider the number of teeth or TPI (Teeth Per Inch). It’s a good indicator of which type of materials can be cut.

 

Ergonomics

How comfortable the hacksaw is to use is an extremely important factor. It is especially important if you’re a professional that will have your hacksaw in your hands all day long. To make sure you get a model which is ergonomic to hold onto, be sure that it has a rubber grip/handle. You may also want to view and hold the hacksaw in person before buying to ensure that it is comfortable for you to hold.

 

 

Final Thoughts on choosing the Best Hacksaw

best hacksaw

 When you’re shopping for a new hacksaw the main thing to consider is how durable it will be. You can always find a cheaper model regardless what tool it is you’re looking at, but in the long run you will save money by buying a quality hacksaw the first time around. The hacksaw is a very useful tool whether used in the garage by a DIY person or in the work shop by a pro. Whichever is your use case scenario, there is a right model for you. To find the right model it’s as simple as going through our hacksaw reviews and considering the pros and cons of each model.

Another important tip is that you might want to consider a hacksaw that has extra blade storage built into the handle as it can really save you from losing the blades. In conclusion, the DEWALT 5 in 1 hacksaw is the top pick for its well rounded features, that come at a very reasonable price. When you buy from a brand like DEWALT you can be sure you’re getting a quality tool, as they have an impeccable reputation to uphold. After you’ve read this guide you might want to take a look at some of our other hand tools we reviewed.

Read also:

 

[lwptoc]

 

Nick Clarke is a woodworker from Cornwall UK, residing in Canada. Nick is the founder of Boneyard Wood co, and hosts the RadDadBuilds show which is enjoyed by 39k subscribers on Youtube and is broadcast Canada-wide to 100k+ daily watchers on Shaw TV.

Similar Posts